Part 5

"The machines were at first bought by farmers who did cutting for the neighbors and under the circumstances were anxious to prostrate as many acres of grain per day as possible; in order to accomplish this, they applied four horses and moved on a 'jog trot.' So moving the reel was found of little service because the rapidly moving machine caused the severed straws to fall backward on the platform so that the raker had little to do but to remove it, except where it was particularly badly lodged; in such cases he manipulated his rake as it is now used on all reelless reaping machines."

After building the machines for Algernon Foster, Mr. Hussey undertook the manufacture of two or more machines for the harvest of 1835. From a letter received from John Lane, we quote:

"'Old Judge Foster' was a well known jurist and judge of court in Hamilton County, Ohio, having his country home (a farm) 3-1/2 miles near due east from my father's place of business, and it was he who introduced Obed Hussey to John Lane as being a mechanic who could and would make for him the reaper he was at that time seeking to have made in Cincinnati. Also it was agreed between said Hussey and Foster that when said reaper had been made and tested to their satisfaction in the standing grains, his sons, Algernon and brother (whose name I do not remember) would pay all costs of making said reaper and put the same in use to best of their ability."

I quote from the book entitled "Valley of the Upper Wabash, Indiana," published by Henry Ellsworth in 1838:

"Another material reduction of the expense attending the cultivation of hay and other crops will be found in the use of some of the mowing and reaping machines recently invented.

"A machine of this description, invented by Mr. Obed Hussey, of Cambridge, Maryland, has of late excited general admiration, from the neatness and rapidity of its execution, and the great amount of labor which its use will save. Its introduction on large farms, of the description we have mentioned, will undoubtedly be followed by remarkable results. These machines, when in good order (and they seldom need repair), can cut from twelve to fifteen acres of grass, and from fifteen to twenty acres of wheat, daily.

"The following letter from John Stonebraker, Esq., of Hagerstown, Maryland, will exhibit his experience in the use of this machine.

"He was induced (as the writer knows from personal communication with him on the subject) to try it from the representations of others, and with many misgivings as to the result. That trial, however, has satisfied him and with him, many of his neighbors, of the great utility of the machine.

"The letter is as follows:

"'Hagerstown, August 15, 1837.

"'Dear Sir: Will you please give this a place in your paper, for the benefit of wheat growers. As the subject is of public interest, it is hoped that other papers will circulate it through the grain growing districts of the country.

"'I procured a reaping machine this summer of Mr. Hussey, the inventor, which I have used through my wheat harvest. It was in constant use every day, and performed its work to my satisfaction, and far better than I had any expectation of when I first engaged it of Mr. Hussey. When the ground is clear of rocks, loose stones, stumps, etc., and the grain stands well, it cuts it perfectly clear, taking every head; and, if well managed, scatters none, but leaves it in neat heaps ready for binding. When the grain is flat down, the machine will of course pass over it; but if it be leaning, or tangled only, it is cut nearly as well as if standing, excepting when it leans from the machine, and then if the horses are put in a trot it will be very well cut. But in cutting such grain much depends on the expertness of the hand who pushes off the grain, in making clean work and good sheaves. I found the machine capable of going through anything growing on my wheat land, such as weeds and grass, no matter how thick.

"'After my harvest was over, I cut my seed timothy with the same neatness and ease that I did my grain. As respects the durability of the machine, I can say this much for my machine, that not the least thing has given out yet; it appears as strong as a cart, and but little liable to get out of order, if well used. I was advised by Mr. Hussey of the necessity of keeping some of the parts well greased; this I have punctually attended to, and no perceptible wear yet appears, beyond the ordinary wear of any other machinery.

"'It is immaterial to the machine whether the speed be a walk, or trot; although a walk will make the most perfect work. My speed was a common walk, but a trot is sometimes necessary to counteract the effect of a strong wind when blowing from behind, in order to incline the grain backwards, on to the platform, to make good bundles. A quick walk is required to make good work in very short and scattering grain. The machine performs well, up or down hill, provided the surface be not too broken. By its compactness and ease of management, rocks, and stumps too high to be cut over, can be easily avoided. Although a rough surface is very objectionable, yet I have cut over very rocky ground with no material difficulty. I can say one thing which to some may appear incredible, but it is not the less true; the cutters of my machine have not been sharpened since I have had it; nor have I yet seen any appearance of a need of it in the quality of its work. How many harvests a machine would cut without sharpening is hard to say. I propose sharpening mine once a year only. I have used two horses at a time in the machine, and sometimes changed at noon; they worked it with ease, the draught being light. I took no account of what I cut in any one day, with this exception: in less than half a day I cut six acres, and was often detained for want of the requisite number of binders, by which much time was lost. My machine being something narrower than those generally made by Mr. Hussey, I could cut but about one acre in going two miles; this, at the moderate gait of two and a half miles per hour, would amount to twelve and a half acres in ten hours; and at four miles per hour, a speed at which the work is done in fine style, the amount would be twenty acres in ten hours. I should judge my quantity per day to range between ten and fifteen acres, yet I am decided in the opinion that I can cut twenty acres in a day, of good grain, on good ground, by the usual diligence of harvest hands, with a little increase of my usual speed, and a change of horses. Two hands are required to work the machine, a man to push off the grain and a boy to drive, besides a number of binders, proportioned to the quantity cut. As the machine can be drawn equally fast in heavy or light grain, the number of binders is necessarily increased in heavy grain, except an additional speed be given in light grain. Under every circumstance, the number of binders will vary from four to ten; and, when the usual care is practiced by the binders, there will be much less waste than in any other method of cutting.

"'I speak with more confidence of the merits and capacity of Mr. Hussey's reaping machine, from the circumstance of having pushed the grain off myself for several days, in order to make myself practically and thoroughly acquainted with it, before putting it into the hands of my laboring men. The land in this country being rather rocky and uneven, it is hard to say what may be the ultimate advantage of these machines to our farmers; but from what little experience I have had, I am resolved not to be without one or two of them. I can therefore recommend the machine with confidence, especially to those who have a large proportion of smooth ground in cultivation. It is undoubtedly a labor saving machine, and worthy of their attention.

'JOHN STONEBRAKER.

'Mr. Bell, Editor of the Torch Light.'

"To this testimonial from one of the best and most practical farmers in Maryland could be added many more, should they be needed. Farther improvements on the part of the inventor, during the past year, have much increased the power of the machine; and its adoption, as a valuable agricultural implement, is becoming very general.

"One of these machines is now in the possession of the writer, which arrived too late for use during the harvest of the present season. From one or two trials, however, and those under the disadvantageous circumstances of arranging a new machine, and the forced selection of a spot little suited for experiment, no doubt remains of the result.

"We add a letter to the inventor from Colonel Tilghmann, who also resides near Hagerstown, Maryland.

"'September 15, 1837.

"'Sir: Your wheat cutting machine was used by me in securing my clover seed. With one man, three boys, and two horses, we cut about twelve acres per day. The operation was in every respect complete. The clover was well cut, and deposited in proper sized heaps, and no raking required, further than to remove the heaps of cut clover from the track of the machine. The whole operation was easily performed by the hands and the horses.

"'In the operation of cutting wheat, I followed the machine for two hours in the field of Mr. John Stonebraker, during the late wheat harvest, and can vouch for the operation in securing his wheat in the manner described in his publication. The late improvements made by you in your machine have added greatly to the beauty and facility of its operation.

'Yours respectfully,

'F. TILGHMANN.'

'Mr. Hussey.'

"We add the following notice of this machine, from Messrs. S. and E. P. Le Compte, enterprising farmers, of Cambridge, Maryland, as follows:

"'Cambridge, July 3, 1838.