Part 13

(Signed) "G. A. MAYHEW, T. R. SEBRING, A. CASTNER, JACOB WHITE, H. B. COFFIN, C. F. COFFIN, S. W. FOLGER, T. B. COFFIN, WM. PADDOCK."

There are several other certificates equally conclusive and satisfactory; but we will only copy in addition to the foregoing, a short piece from the Farmer and Mechanic, issued July 3d, 1833, in Cincinnati, as follows:

"Several members of the Agricultural Society on last Wednesday attended in Carthage to see a machine for cutting wheat by horse power, in operation. It was propelled by two horses, and cut as fast as eight persons could conveniently bind, doing the cutting neatly.

"This machine is the invention of Mr. O. Hussey, and will no doubt prove a useful addition to our agricultural implements. Mr. J. C. Ludlow suggested that it would be good economy of time and labor to take a threshing machine into the field and thresh out the grain as it is reaped, thereby saving the binding and hauling to the barn or stack. We think the suggestion a good one."

Here, then, was the problem solved--the great discovery made that had puzzled the brains of hundreds if not of thousands, and for centuries. No one we fearlessly assert had ever succeeded so completely and satisfactorily, and with so simple and practical a machine.

Some visited the exhibition determined to condemn as they afterwards acknowledged, deeming the thing impracticable; but all were convinced; for the demonstration was of that character which left no room for doubt or cavil in the minds of any.

It was indeed a triumph,--not perhaps entirely unexpected to the inventor--but neither he, nor any one else at that early day, could foresee the wonderful changes ultimately to be effected, and the world-wide renown to be conferred on the inventor as the result of this experiment; one that was certain to immortalize his name as a pioneer and benefactor in the most useful and peaceful pursuits in life. It was too, the dawn of a brighter day to the toiling husbandman, by lightening his labors, and adding to his comfort and independence; only circumscribed in its beneficial influence by the bounds of civilization.

Some may possibly suppose that we view the invention in too glowing colors; but we have yet to meet with the farmer who owned a good reaping and mowing machine that would dispense with its advantages for twice the cost of the implement, and again be compelled to resort to the sickle, the cradle, and the scythe; for of a truth it completely supersedes all three in competent hands and with fair usage, in both the grain and grass crops.

It is difficult to confine our narrative to its intended brief limits and select from the mass of evidence on hand as to the uninterrupted success off Hussey's invaluable invention from that day to the present--now twenty-one years. We will therefore only select a single and short account of each year; until about 1840 or '42; not long after which a few other inventors came before the public. There was, however, no competitor in the field from 1833 to 1841 or 1842, either in Europe or America, so far as we can ascertain, that did more than make a few occasional trials; none attracted public attention, or were successful and efficient machines even in the estimation of the projectors themselves. The evidence proves it, and it is corroborated by our own personal knowledge, having been constantly engaged in Agricultural and Mechanical pursuits for more than thirty years--and, as we believe, familiar with most of the important improvements of the age;--of all in fact, directly connected with agriculture in its labor saving implements, of any notoriety.

Many alleged improvements have been made in the Reaper in the past ten or twelve years; and many more still within half that period. How far they are new inventions, and actual improvements, we can better judge by examining Hussey's patent; for it describes the cutting apparatus clearly and minutely, and which in fact is the whole thing,--the "one thing needful" to success. For the use of wheels, or a system of gearing to all kinds of motive machinery is coeval with the first dawn of mechanical science. How ancient we know not, for the Prophets of old spoke of "wheels within wheels" near three thousand years ago; and it is very certain the hand of man, unaided by wheels and machinery, never erected the vast Pyramids and other structures of antiquity. We do not believe there is a single Reaping and Mowing machine in successful operation on this continent that is not mainly indebted to Hussey's invention in the cutting apparatus, for its success: deprive them of this essential feature--disrobe them of their borrowed plumes, and their success would be like the flight of the eagle, suddenly bereft of his pinions,--he must fall; and the machines would stand still, for not a farmer in the land would use them.

As previously remarked, O. Hussey's first patent is dated in 1833. We omit the more general description of the machine, and copy only what embraces the most important features, the guards and knives; also an extract from his improvement patented in 1847, to obviate choking in the guards:

"On the front edge of the platform is fixed the cutting or reaping apparatus, which is constructed in the following manner: A series of iron spikes, and which I will call guards, are fixed permanently to the platform, and extend seven or eight inches, more or less, beyond the edge of the platform, parallel to each other, horizontal, and pointing forward. These guards are about three inches apart, of a suitable size, say three-quarters of an inch square, more or less, at the base, and lessening towards the points. The guards are formed of a top and bottom piece, joined at the point and near the back, being nearly parallel, and about one-eighth of an inch apart, forming a horizontal mortice or slit through the guard; these mortices being on a line with each other, form a continued range of openings or slits through the guards. The first guard is placed on the rear of the right wheel, and the last at the extreme end of the platform, and the intermediate guards at equal distances from each other, and three inches apart, more or less, from center to center.

"The cutter or saw (f) is formed of thin triangular plates of steel fastened to a straight flat rod, (g) of steel, iron or wood, one inch and a half wide; these steel plates are arranged side by side, forming a kind of saw with teeth three inches at the base, and four and a half inches long, more or less, sharp on both sides, and terminating nearly in a point. The saw is then passed through all the guards in the aforesaid range of mortices, the size of the mortice being suited to receive the saw with the teeth pointing forward; observing always that the points of the saw teeth should correspond with the center of the guards. One end of the saw is connected with a pitman moved by a crank, and receiving its motion from the main axis, by one or two sets of cog wheels. The vibration of this crank must be equal to the distances of the centers of the guards, or the points of the saw teeth, or thereabouts, so when the machine is in motion, the point of each saw tooth may pass from center to center of the guards on each side of the same tooth at every vibration of the crank; if the main wheels are three feet four inches in diameter, they should in one revolution give the crank sixteen vibrations, more or less; the saw teeth should play clear of the guards, both above and below. * * *

"The power is given by locking the wheels to the main axis, the machine has one square wheel box, the other round and locked at pleasure. If the power should be wanted, one, two, or more horses are attached and driven on the stubble before the machine, the right wheel running near the standing grain, the platform with the saw in its front edge extends on the right, at right angles with the direction of the horses, with the guards and saw teeth presented to the standing grain--when the machine moves forward, the saw moves with the teeth endwise and horizontal, the grain or grass is brought between the guards, the saw teeth in passing through the guards, cut the stalk while held both above and below the saw--the butts of the grain receive an impulse forward by the motion of the machine while in the act of being cut, which causes the heads of the grain to fall directly backwards on the platform--in this manner the platform receives the grain until a sufficient quantity is collected to make one or more bundles, according to the pleasure of the operator, then it is deposited with a proper instrument by the operator, who may ride on the machine."

Here follows the dimensions of a machine suited to two horses, which is only copied so far as refers to the cutting apparatus, viz: "The back of the saw may be from one inch to one and one-half inches wide, and from three-sixteenths to one-quarter of an inch thick; and the steel plates for the teeth should be about one-tenth of an inch thick; one end of the mortice in the guard should be fitted to receive the back of the saw, so that the bearing may be on the back of the saw only."

"In this machine the following points are claimed as new and original: 1st. The straight horizontal saw, with the teeth sharp on their two sides for cutting grain. 2d. The guards forming double bearers above and below the saw, whereby the cutting is made sure, whether with a sharp or dull edge, the guards at the same time protecting the saw from rocks or stones, or other large substances it may meet with. 3d. The peculiar construction that the saw teeth may run free, whereby the necessary pressure and consequent friction of two corresponding edges cutting together, as on the principle of scissors, is entirely avoided. 4th. The peculiar arrangement by which the horses are made to go before the machine, being more natural, and greatly facilitating the use of the machine, and the general arrangement of the points as above described.

"In cutting grass, the platform is reduced in width, and the grass falls on the ground as it is cut."

In the improvement of the guards patented in 1847, the claim states: "I accordingly claim the opening above the blades A, fig. 3, and at D, fig. 1, in combination with vibrating blades. I also claim the particular application of the flush edge at the fork of the blades, for the purpose described.

"The end and design of the improvements above claimed is to prevent the blades choking."

En passant, we would ask any intelligent and candid farmer or mechanic who has examined a successful reaper, to compare the foregoing plain specifications which all can understand, with the cutting apparatus of the most successful modern machine. And we would especially desire him to compare them in principle with the "improved form of fingers to hold up the corn, and an iron case to preserve the sickles from clogging;" not the alleged invention of 1831, by C. H. McCormick, and abandoned from 1840 to 1843, but the claims patented by him in 1845 [as stated in the letter to Philip Pusey, M. P.], twelve years after the date of Hussey's patent, and twelve years after his most complete and uninterrupted success in cutting both grain and grass. In fact, there was no year from and including 1833 up to 1854, a period of 21 years the past harvest, that we have not the most positive and conclusive evidence of the success of Hussey's reaper; in numerous cases the same machines had cut from 500 to 800, and even one thousand acres; in one instance, the same machine was used for fourteen harvests, or as many years, successively and successfully.

We have given some of the evidence for 1833. For 1834 we annex two letters giving an account of the two machines made this year, one in Illinois, and the other in New York, viz:

"Spring Creek, Sangamon Co., Ill., "October 1st, 1854.

"Mr. Obed Hussey, Baltimore:

"Dear Sir:--Your favor of August 10th came to hand a few days since. The reason was, it lay at Berlin (formerly Island Grove Post-office) and my Post-office address is Springfield, the only place where I call for letters.

"In answer to your query, how your Reaping Machine worked in 1834, I have to say that it cut about sixteen acres of wheat for me on my farm; that it did the work in first rate style; according to my best recollection, as well as any of the machines that have since been introduced. The only objection I recollect being made, was, that when the straw was wet, or there was much green grass among the wheat, the blades would choke. You certainly demonstrated in 1834 the practicability of cutting grain or grass with horse-power; and all the machines since introduced seem to have copied your machine in all its essential features.

"I am respectfully yours,

"JOHN E. CANFIELD."

The next letter we copy from the Genesee Farmer of December 6th, 1834. The reader will readily perceive that the author, William C. Dwight, knew how to handle the pen as well as the plow, and equally well to work the reaper, being a practical farmer. But we are pained to add that he lost his life by the fatal railroad accident at Norwalk, Ct., about a year since.