Part 14

There are other differences between our two types of computers, among them being the less obvious fact that it is harder to make a self-checking analog computer than it is to build the same feature into the digital. However, the most important differences are those of accuracy and flexibility.

For these reasons, the digital computer today is in the ascendant, although the analog continues to have its place and many are in operation in a variety of chores. We have mentioned fire control and the B-29 gunsight computer in particular. This was a pioneer airborne computer, and proved that an analog could be built light enough for such applications. However, most fire-control computers are earthbound because of their size and complexity. A good example is the ballistic computer necessary for the guns on a battleship. In addition to the normal problem of figuring azimuth and elevation to place a shell on target, the gun aboard ship has the additional factors of pitch, roll, and yaw to contend with. These inputs happen to be ideal for analog insertion, and a properly designed computer makes corrections instantaneously as they are fed into it.

A fertile field for the analog computer from the start was that of industrial process control. Chemical plants, petroleum refineries, power generating stations, and some manufacturing processes lend themselves to control by analog computers. The simplicity and economy of the “modeling” principle, plus the instantaneous operation of the analog, made it suitable for “on-line” or “on-stream” applications.

The analog computer has been described as useful in the design of engines; it also helps design the aircraft in which these engines are used, and even simulates their flight. A logical extension of this use is the training of pilots in such flight simulators. One interesting analog simulator built by Goodyear Aircraft Corporation studied the reactions of a pilot to certain flight conditions and then was able to make these reactions itself so faithfully that the pilot was unaware that the computer and not his own brain was accomplishing the task.

The disciplines of geometry, calculus, differential equations, and other similar mathematics profit from the analog computer which is able to make a model of their curves and configurations and thus greatly speed calculations. Since the analog is so closely tied to the physical rather than the mental world, it cannot cope with discrete numbers, and formal logic is not its cup of tea.

Surely, progress has been made and improvements continue to be designed into modern analog computers. Repetitive operations can now be done automatically at high speed, and the computer even has a memory. High-speed analog storage permits the machine to make sequential calculations, a job once reserved for the digital computer. But even these advances cannot offset the basic limitations the analog computer is heir to.

Fewer analog machines are being built now, and many in existence do not enjoy the busy schedule of the digital machines. As the mountains of data pile up, created incidentally by computers in the first place, more computers are needed to handle and make sense of them. It is easier to interpret, store, and transmit digital information than analog; the digital computer therefore takes over this important task.

Even in control systems the digital machine is gaining popularity; its tremendous speed offsets its inherent cumbersomeness and its accuracy tips the scales more in its favor. These advantages will be more apparent as we discuss the digital machine on the next pages and explain the trend toward the hybrid machine, ever becoming more useful in the computer market place. Of course, there will always be a place for the pure analog—just as there has always been for any specialist, no matter what his field.

The Digital Counter

The digital computer was first on the scene and it appears now that it will outnumber and perhaps outlive its analog relative. A simple computer of this type is as old as man, though it is doubtful that it has been in use that long. Proof of this claim to its pioneering are the words digit and calculi, for finger and pebbles, respectively. We counted “how many” before we measured “how large,” and the old Romans tallied on fingers until they ran out and then supplemented with pebbles.

Perhaps the first computations more complex than simple counting of wives or flocks came about when some wag found that he could ascertain the number of sheep by counting legs and dividing by four. When it was learned that the thing worked both ways and that the number of pickled pigs feet was four times the number of pigs processed, arithmetic was born. The important difference between analog and digital, of course, is that the latter is a means of counting, a dealing with discrete numbers rather than measuring.

This kind of computation was taxed sorely when such things as fractions and relationships like pi came along, but even then man has managed to continue dealing with numbers themselves rather than quantity. Just as the slide rule is a handy symbol for the analog computer, the abacus serves us nicely to illustrate the digital type, and some schools make a practice of teaching simple arithmetic to youngsters in this manner.

Our chapter on the history of the computer touched on early efforts in the digital field, though no stress was laid on the distinction between types. We might review a bit, and pick out which of the mechanical calculating devices were actually digital. The first obviously was the abacus. It was also the only one for a long time. Having discovered the principle of analogy, man leaned in that direction for many centuries, and clocks, celestial simulators, and other devices were analog in nature. Purists point out that even the counting machines of Pascal and Leibnitz were analog computers, since they dealt with the turning of shafts and gears rather than the manipulation of digits. The same reasoning has caused some debate about Babbage’s great machines in the 1800’s, although they are generally considered a digital approach to problem-solving. Perhaps logicians had as much as anyone to do with the increasing popularity of the digital trend when they pointed out the advantages of a binary or two-valued system.

With the completion in 1946 by Eckert and Mauchly of the electronic marvel they dubbed ENIAC, the modern digital computer had arrived and the floodgates were opened for the thousands of descendants that have followed. For every analog computer now being built there are dozens or perhaps hundreds of digital types. Such popularity must be deserved, so let us examine the creature in an attempt to find the reason.

Courtesy of the National Science Foundation

The computer family tree. Its remarkable growth began with government-supported research, continued in the universities; and the current generation was developed primarily in private industry. ]

We said that by its nature the analog device tended to be a special-purpose computer. The digital computer, perhaps because its basic operation is so childishly simple, is best suited for general-purpose work. It is simple, consisting essentially of switches that are either on or off. Yet Leibnitz found beauty in that simplicity, and even the explanation of the universe. Proper interconnection of sufficient on-off switches makes possible the most flexible of all computers—man’s brain. By the same token, man-made computers of the digital type can do a wider variety of jobs than can the analog which seemingly is more sophisticated.

A second great virtue of the digital machine is its accuracy. Even a trial machine of Babbage had a 5-place accuracy. This is an error of only one part in ten thousand, achievable in the analog at great expense. This was of course only a preliminary model, and the English inventor planned 20-place accuracy in his dream computer. Present electronic digital computers offer 10-place accuracy as commonplace, a precision impossible of achievement in the analog.

We pointed out in the discussion of analog computers that the complexity and expense of increased accuracy was in direct proportion to the degree of accuracy desired. Happily for the digital machine, the reverse is true in its case. Increasing accuracy from five to six figures requires a premium of one-fifth, or 20 per cent. But jumping from 10-place to 11-place precision costs us only 10 per cent, and from 20-place to 21-place drops to just 5 per cent.

Actually, such a high degree of accuracy is not necessary in most practical applications. For example, the multiplication of 10-digit numbers may yield a 20-digit answer. If we desired, we could increase the capability of our digital computer to twenty digits and give an accuracy of one part in 10 million trillion! However, we simply “round off” the last ten digits and leave the answer in ten figures, an accuracy no analog computer can match. The significant point is that the analog can never hope to compete with digital types for accuracy.

A third perhaps not as important advantage the digital machine has is its compactness. We are speaking now of later computers, and not the pioneer electromechanical giants, of course. The transistor and other small semiconductor devices supplanted the larger tubes, and magnetic cores took the place of cruder storage components. Now even more exotic devices are quietly ousting these, as magnetic films and cryotrons begin to be used in computers.

Science Materials Center

BRAINIAC, another do-it-yourself computer. This digital machine is here being programmed to solve a logic problem involving a will. ]

This drastic shrinking of size by thinking small on the part of computer designers increases the capacity of the digital computer at no sacrifice in accuracy or reliability. The analog, unfortunately, cannot make use of many of these solid-state devices. Again, the bugaboo of accuracy is the reason; let’s look further into the problem.

The most accurate and reliable analog computers are mechanical in nature. We can cut gears and turn shafts and wheels to great accuracy and operate them in controlled temperature and humidity. Paradoxically, this is because mechanical components are nearer to digital presentations than are electrical switches, magnets, and electronic components. A gear can have a finite number of teeth; when we deal with electrons flowing through a wire we leave the discrete and enter the continuous world. A tiny change in voltage or current, or magnetic flux, compounded several hundred times in a complex computer, can change the final result appreciably if the errors are cumulative, that is, if they are allowed to pile up. This is what happens in the analog computer using electrical and electronic components instead of precisely machined cams and gears.

The digital device, on the other hand, is not so penalized. Though it uses electronic switches, these can be so set that even an appreciable variation in current or voltage or resistance will not affect the proper operation of the switch. We can design a transistor switch, for example, to close when the current applied exceeds a certain threshold. We do not have to concern ourselves if this excess current is large or small; the switch will be on, no more and no less. Or it will be completely off. Just as there is no such thing as being a little bit dead, there is no such thing as a partly off digital switch. So our digital computer can make use of the more advanced electronic components to become more complex, or smaller, or both. The analog must sacrifice its already marginal accuracy if it uses more electronics. The argument here is simplified, of course; there are electronic analog machines in operation. However, the problem of the “drift” of electronic devices is inherent and a limiting factor on the performance of the analog.

These, then, are some of the advantages the digital computer has over its analog relative. It is more flexible in general—though there are some digital machines that are more specialized than some analog types; it is more accurate and apparently will remain so; and it is more amenable to miniaturization and further complexity because its designer can use less than perfect parts and produce a perfect result.

In the disadvantage department the digital machine’s only drawback seems to be its childish way of solving problems. About all it knows how to do is to add 1 and 1 and come up with 2. To multiply, it performs repetitive additions, and solving a difficult equation becomes a fantastically complex problem when compared with the instantaneous solution possible in the analog machine. The digital computer redeems itself by performing its multitudinous additions at fabulous speeds.